![]() ![]() With inevitable variations in powder and bullet options, it is always best to confirm all points of impact identified in a scope by testing at the range. ![]() Knowing exactly where your bullet will hit provides the confidence to make anyone a better shooter. It is recommended hunters test the point of impact at the different distances, at the range, before going hunting. The assorted products are extremely easy to use, and shooters simply need to sight in for 100 yards, and the hold-over points in the scope will line up. The range-specific scopes use the second focal plane for the reticles to work, meaning the scope must be at maximum power for the shooting systems to work. That is, there is a point for 50, 100, 150, 200 and 250 yards in the scope. ![]() The calculated bullet drop, built into the scope, offers a point of impact at 50-yard intervals with a reticle bar, dot or crosshair. They developed reticles for a direct hold on target out to 250 or even 300 yards. Optic companies recognized most hunters were using magnum loads and designed optics to appeal to the masses. There are several variations of a magnum load, but most compare to Pyrodex or Triple 7. Using 150-grains of Pyrodex or Triple 7 powder and a 250-grain Smackdown bullet in a sabot is standard. Although there is a wide range of powder and trajectory options for front stuffers, most hunters have chosen to use maximum or magnum loads. Today, the better the rifle scope on your muzzleloader, the farther you can shoot accurately and confidently. In short, long-barreled guns were consistently the most accurate, and with many loads, they provided a velocity advantage. Velocities were another 50 fps slower on average from a muzzleloader with a 24-inch barrel. The proof is in the chronograph, which showed a stark velocity difference, with the 30-inch barrel producing speeds about 200 fps faster on average, over a similar rifle with a 28-inch barrel. The rifle shot impressive groups when tested at the range and never failed under any of the strenuous checks and assessments it endured. The lightweight trigger is important for anyone wanting to shoot accurately at longer range. The StrikerFire LDR is enjoyable to shoot with a two-stage trigger factory set at a mere 2 pounds, and even though it only weighs 6.8 pounds the recoil is well managed. The rifle also has a hammerless cocking system, lightweight design, and alloy frame. ![]() In other words, it provides improved ballistics, with more barrel to burn powder and stabilize the bullet in flight. Traditions Performance Firearms has been engineering longer barrels for its muzzleloaders, providing greater effective range and performance.įor instance, the Traditions StrikerFire LDR has a 30-inch Chromoly barrel that provides down-range accuracy and reliability as well as increased velocity that is easy to measure. Bullets and powders offer better velocities and energy, allowing shooters to stay on target at distances previously thought unachievable. Barrels machined to precise tolerances, and ignition sources have essentially done away with misfires. Muzzleloaders have changed drastically in the last two decades, offering hunters reliability and accuracy in well-crafted firearms. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |